Our flying fields are created from actual photos of RC sites. The site photos, enhanced by our patented PANOlusion Engine®, and its panoramic technology, allow us to recreate flying environments in 3D.
The texture of the terrain has real world impact on take-off and landing. Direct and indirect sunlight, fog, shadows and wind mimic the real worldin angle, density, shading and intensity
Redefining the physics of flight
There’s more to RC flying than selecting the right control inputs. Outside on a field, you’re constantly feeling and interpreting model feedback. You’re learning to react to even the slightest instability. Ordinary simulators rarely got these nuances right. The Reflex XTR Flight Simulator does.
Your model’s performance will mirror the smallest change in input…and every model will react differently, just as it would in real life. Until now, the technology for this level of realistic feedback and response was unavailable. Reflex XTR Flight Simulator nailed it.
Reflex XTR RC Flight Simulators
Looking at flight simulators realistically,
if you’ve ever flown a model on a flight simulator, the flying field and scenery were more like a “video game” than a real flying field. With the Reflex XTR Flight Simulator, you’re no longer limited to “video game” graphics. It’s so realistic, you’ll swear you’re looking at video footage
FEATURES:
AVCS System: Since the rudder trim changes (caused by wind and other meteorological changes) the front, rear, and other heli attitudes change and are automatically cancelled; tail (rudder) operation is easy, making it perfect for 3D flight. (also known as heading hold gyro)
SMM Gyro Sensor: Use of this newly developed technology virtually eliminates rudder trim changes during flight (see COMMENTS).
Digital Servo Compatible (DS Mode): DS mode makes it compatible with Futaba digital servos. This maximizes the high-speed response performance of the digital servo. Included high-speed S9254 digital servo boasts 47 oz-in torque and a speed of .06 seconds @ 60°
Remote Gain Function and Mode Switching Function Remote: Gain function allows sensitivity switching from the transmitter and mode switching function allows AVCS/normal gyro mode switching. Integrated, compact and lightweight design made possible by high density mounting technology.
Conductive Resin Case: This case improves EMC (Electrostatic and electromagnetic interference) resistance.
Futaba GY401 Gyro w/S9254 Digital Servo
This is the Futaba GY401 Gyro with an S9254 Digital Servo.
This is a high performance, compact and lightweight
(AVCS) Angular Vector Control System gyro developed for model helicopters.
Because the sensor and control circuit are integrated, it is simple to install.
INCLUDES:
One GY401 gyro
One S9254 digital servo, available separately FUTM0224
One 0.81" (20.5mm) round servo horn, one 1.8" (45mm) round servo horn one 1.25" (32mm) 6 point servo horn, one 1.5" (39mm) 4 point horn,
mounting hardware
One mini plastic adjustment screwdriver
Three mounting pads
One instruction sheet
SPECS:
GY401 Gyro-S9254 Digital Servo
Length: 1.1" (27mm) 1.6" (40mm)
Width: 1.1" (27mm) 0.79" (20mm)
Height: 0.79" (20mm) 1.4" (36.2mm) not including horn
Weight: 0.95oz (27g) 1.8oz (50g)
Torque: 47 oz-in
Speed: .06 sec @60°
INCLUDES: One O.S. Max .50 SX-H Helicopter Engine with Hyper Cooling Head, 60LH carburetor (OSMG2469), decal sheet, #8 glow plug, instruction manual
REQUIRES: 10% to 30% nitro Fuel with at least 18% lubricant (Helicopter Mix); Starting equipment
O.S. .50 SX-H Ringed Hyper
instock $ 199.99
This is the O.S. Max .50 SX-H Ring Hyper Helicopter Engine with Hyper Cooling Head and 60LH Carburetor. Ideal for use in any 50 class helicopter.
New head design offers improved combustion efficiency for stable hovering and aerobatic flight. Large 0.39" (10mm) diameter carburetor intake for greater running stability.
Two year limited warranty
Same mounting dimensions as the O.S. Max .46FX-H
SPECS: Output: 1.9ps/17,000 RPM
Practical RPM Range: 2,000-20,000 RPM
Displacement: 0.499 cu.in (8.0cc)
Bore: 0.866in. (21.99mm)
Stroke: 0.847in. (21.51mm)
Weight: 14.33oz (405.4g)
FEATURES:
Ringed for long life. 3-needle carb for ultimate tuning precision. (Settings are covered on pages 14 & 15 of the manual)
High Speed: 2 turns OUT
Medium Speed: 1 tunn OUT
Idle Mixture: Refer to picture on page 14
Two extra mounting lugs on the front, allow modelers to mount the engine securely in helis. Designed with the FAI F3C competitor in mind, allowing 3D pilots an edge over the standard .60 size engine.
Throttle assembly reference marks make it easy to note and restore finely tuned settings after maintenance.
Front and rear ball bearing-supported crankshaft reduces friction and wear.
Large heli cylinder head offers generous cooling fin area, with increased webbing on crankcase front for heat dissipation.
Installs in the same space as a .61 engine.
INCLUDES: One .70SZ-H Ringed Helicopter engine; #8 OS Glow Plug and Decals
REQUIRES: Muffler & Fuel
SPECS: Displacement: 11.50cc (.702cu in)
Bore: 25.8mm (1.016in) Stroke: 22.0mm (.866")
Power Output: 2.5HP at 16,000 RPM Weight: 553.5g (19.5 ozs.)
Practical RPM Range: 2,000 - 18,000 RPM
Crankshaft Thread Size: 5/16-24
Length: 81.3mm Backplate to the front of the crankcase
Width: 42.6mm width of engine neglecting the mounting flanges
25mm distance between mounting hole centers
60mm Distance from rear mount to front mount centers
52mm Side to side centers of rear mounting holes
42mm Side to side centers of foremost mounting holes
42mm distance between mounting holes for exhaust
O.S. .70 SZ-H Ringed INSTOCK $279.99
This is the .70 SZ-H Ring Engine from O.S. designed with the FAI F3C Pilot in mind.
O.S. .91SZ-H Ringed w/60M-C Carburetor
INSTOCK $349.99
This is the O.S. Max .91 SZ-H Ringed Helicopter Engine.
This engine powered the 1st, 2nd and 3rd place finishers in the 2005 World Championships in Spain.
FEATURES:
Redesigned crankcase provides better support for the crankshaft and
thrust bearings
New 60M 3-needle carburetor with mid-range needle for precise
adjustments and push/pull throttle arm for added precision in power control
Front and rear ball bearing-supported crankshaft
Two year limited warranty
INCLUDES:
O.S. Max .91 SZ-H Ringed Helicopter Engine with #8 glow plug, instruction manual, one each 0.2mm and 0.1mm thick head gaskets
REQUIRES:
Fuel: 10%-30% nitromethane with at least 18% lubricant. Lubricants may be either castor or synthetic oil or castor/synthetic blend.
Field Equipment: glow starter, fuel bulb, fuel can filter, fuel pump, hexagonal starting shaft (depending on brand of helicopter)
electric starter, battery and fuel tubing. Muffler- This is specific to the heli.
SPECS:
Displacement: 0.912 cu in (14.95 cc)
Bore: 1.091" (27.7mm)
Stroke: 0.976" (24.8mm)
Output: 3.3 ps @ 15,000 RPM
Practical RPM Range: 2000-16,000
Weight Without Muffler: 21.3oz (605g)
Height from crankcase bottom to top of cylinder head: 4.1" (105mm)
Height/bottom of mounting tab to top of cylinder head: 3.4" (87.4mm)
Distance between mounting holes same side: 0.98" (25mm)
Distance between mounting holes opposite side: 2.04" (52mm)
Distance between muffler screw holes: 1.6" (42mm)
Distance/bottom of mounting tab to muffler screw holes: 1.7" (42.8mm)
Length from front of case to backplate: 3.3" (84mm)
Length from backplate to end of crankshaft: 0.63" (116mm)
Width of crankcase below mounting tabs: 1.7" (42.6mm)
Width between mounting tabs: 2.4" (61mm)
FEATURES: Premium performance for 30-sized machines, from extreme aerobatics to
stable hovering
Same mounting pattern and muffler dimensions as the .32 SX-H, for
easy installation in most 30-size helis
Re-engineered crankshaft reduces vibration resulting in smooth power
across the entire RPM range
20M carburetor with Idle Needle positioned on same side as Main
Needle for easier adjustments
INCLUDES: One O.S. Max .37 SZ-H Ring Helicopter Engine, with #8 Glow Plug,
20M Carburetor, instruction manual and sticker sheet
O.S. 37SZ-H Ringed
instock $152.99
Thunder Tiger - RL-53H Redline Extreme Power Model Engine
REDLINE is a new engine product line of Thunder Tiger.
High performance is one of the main features of the
Redline series engine.
Specification:
Displacement: 8.27 cc. / 0.529 cu. in.
Bore: 22.5 mm. / 0.886 in.
Stroke: 21.8 mm. / 0.858 in.
Practical RPM: 2,000 ~ 21,000
Output: 2.1 BHP / 17,000 RPM
Weight: 380 g. / 13.40 oz.
With the largest displacement in the .50 size engine category. The XC2 extreme composite coating with nano-technology from Japan enhances engine performance. The all-new designed carburetor is mounted to the crankcase with a heat insulator to keep the carburetor working at stable temperature in different conditions.
All Thunder Tiger engines have been designed to combine high performance with easy handling and maintenance using CAD computer technology, resulting in consistent high quality and reliability. Subjected to rigorous quality control check ensures that it will provide years of trouble free use.
INSTOCK $ 185.99
Micro/Mini Helicopter Pitch Gauge $12.99
Blade Balancer w/Level $25.99
Key Features
Balanced blades provide smoother, vibration-free performance
Deluxe Ball Link Pliers: All $13.95
Key Features
Removes and attaches most brands of heli ball links
High grade carbon steel
Precision ground tip
PRECISION PITCH GAUGE
HELI ACCESSORY PARTS LIST $29.99
93mm STUBZ 3MM FLYBAR $38.95 #yb-p393
84mm stubz 4mm flybar $42.99 #yb-p484
105mm super stubz 3mm flybar $ 42.99 #yb-p3105
105mm super stubz 5 mm flybar $42.99 yb-p5105
The perfect addition to your 50 sized helicopter. These paddles offer aggressive control while still maintaining smooth flight characteristics for those 3d pilots looking to get the max control out of their helicopters. In combination with the Radix blades, you've got a winning setup for both the world champ and club aces alike.
The 393's are a great choice for 600 or 500 sized helicopters with a 3mm flybar. They are similar to the 3105's, however much more stable in fast forward flight
Designed and Flown by Mulit-Time World Champion Curtis Youngblood. These paddles provide aggressive response but still fly very stable in fast forward flight.
*Make sure to set cyclics at maximum throws, and the highest flybar ratio for best performance. Also paddles fly best at a higher RPM.
Similar in design to the Stubz paddles, however these are longer and give your helicopter much more aggressive flight characteristics, making them perfect for the 3d pilot. These weigh about 12 grams each, and measure 105mm long.
Radix 105mm Tail Blades - YEI-YB-105 $28.99
Radix Tail blades are light, rigid and CG corrected. Each length of our tail blades will give you optimum pirouette, holding and stopping power.
Radix 92mm Tail Blades - YEI-YB-92 $26.99
Radix Tail blades are light, rigid and CG corrected. Each length of our tail blades will give you optimum pirouette, holding and stopping power.
Radix 72mm Tail Blades - YEI-YB-72 $23.99
A solid Tail Blade option for the 500 sized machines, including the Trex 500.
600mm Radix Blades - YEI-YB-600 $93.99
Radix blades fly light and quick for agressive 3D but they still do forward flight like they are on rails. In addition to their smooth precise flight characteristics they are also one of the quietest blades in the air. To top it off they auto great. The perfect combination for a 3D blade.
690mm Radix Blades - YEI-YB-690 $123.99
Radix blades fly light and quick for agressive 3D but they still do forward flight like they are on rails. In addition to their smooth precise flight characteristics they are also one of the quietest blades in the air. To top it off they auto great. The perfect combination for a 3D blade.
710mm Radix Blades - YEI-YB-710 $123.99
Radix blades fly light and quick for agressive 3D but they still do forward flight like they are on rails. In addition to their smooth precise flight characteristics they are also one of the quietest blades in the air. To top it off they auto great. The perfect combination for a 3D blade.
430mm Radix Blades - YEI-YB-430 $62.99
Here they are, the perfect addition to your 500 sized model. Smooth yet aggressive flying characteristics, along with the famous Radix quality standard.
325mm Radix Blades - YEI-YB-325 $47.99
The perfect addition to your small electric helicopter. 325 blades perfect for T-rex 450 or similar size helis. (315mm bolt hole to tip)
325mm Radix Blades - YEI-YB-325 $43.99
The perfect addition to your small electric helicopter. 325 blades perfect for T-rex 450 or similar size helis. (315mm bolt hole to tip)
Radix Tail blades are light, rigid and CG corrected. Each length of our tail blades will give you optimum pirouette, holding and stopping power
Super Stubz 4mm Paddles - YEI-YB-P4105 $43.99
Similar in design to the Stubz paddles, however these are longer and give your helicopter much more aggressive flight characteristics, making them perfect for the 3d pilot. These weigh about 12 grams each, and measure 105mm long.
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold separately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
●Suitable Voltage Range:DC 3~8.4V
●Current Comsumption:<80mA @ 4.8V
●Flip and Roll rate detection speed: :±300degrees/sec
Radix 710 SB's are a lighter version of our popular Radix 710mm blades. These blades offer more aggressive flight characteristics, and have a much more "poppy" feel to them. Makes for a perfect 3d Blade!
